| |
|
Pad PTFE
pipelines and pipeparts |
|
Fluorine plastic
pipelines、elbows、fourroutes、inspect-lens、meter
tie-ins、differ dia. pipes、access chlorin pipes of F4(add
liquid pipes) |
| |
|
1、Inspect-lens |
|
Use it to observe the flux of cell hydro-、the change of
colour and lustre inside of pipeline or equipment,
surveil of chemical craft flow firsthand, working
temperature≤150℃, working tension≤1.5 Mpa. |
| |
|
2、Access
chlorin pipe of F4(add liquid pipe) |
|
The product have form of interior circle
exterior、exterior circle interior、whole PTFE. Advice the
custmers to proofread equipment or reaction feed-in pipe
innerpath, feed-in units time flux to confirm outerpath
and virtual innerpath of adding liquid pipe. |
| |
|
3、Using
request of steel pipe、flange of pad PTFE pipeline
Inside、pipeparts |
|
1、Pipeline adopt no slot steel pipe of state criterion,
because of craft request,the virtual channels of pipe
padding inside less than DN of steel pipe |
|
2、Flange can base of custmers’ request to according
state criterion of HG、GB、JB、ANSI、JIS、BS、DIN to smithing
also can confirm by pact, because of machining craft of
airproof-side, so advice to choose flat weld flange of
board form、neck form. Airproof-sides are all planar
airproof form,in order to install pipeline, we can
afford volitant flange of flat welding |
| |
|
4、
Testing、proving and using bound of pading PTFE Inside
lining |
|
1、Pipelines and pipeparts are all put to hydraulic
pressure test to design in 1.5 multiple |
|
2、All relate to pad PTFE inside lining after hydraulic
pressure test, put up to whole prove 100%,its’ test way
of leak dot adopt electricity-spark to test |
|
3、Using bound |
|
a.Using temperature:-20℃～200℃； |
|
Pad PO[PE]
pipeline and pipeparts |
|
1．Use
import high-powered stuff and logical formulation, adopt
international advanced heat-roll-pad craft to integrate
plastic and steel melt, so that whole prevent canker
lining have trait thereinafter |
|
a.
No joint、resist concussion、resist aging、 resist positive
or negative tension. Exterior smooth、any form steelparts
all can pad inside or outside |
|
b. Universal temperature：-60～100℃ |
|
c.
Universal tension：-0.07Mpa～2.5Mpa |
|
2.The bound in point: widely used in field of
chemical-industry、electric
power、smelt、pharmacy、deli.、entironment protect、plating etc.
except for 95% upwards vitriol、oil of vitriol,
abio-acid、organic acid 、lye- salt of diversified chroma all
jarless, It’s the perfect rotproof stuff to replace of
latex、porcelain enamel、stainless steel、glass steel、plastic
board(pipe) pad lining. |
|
|
|
Befor
using maintenance and notice things |
|
1、Not to leave long time hypaethral、shun
solarization、drench、shun strike acutely、multilayer stack
heavy to pile |
|
2、Utterly not to scrape、 skive 、pull、scratch or butt with
hard thing at airproof-side |
| 3、Utterly
not to electric welding、wind skiving 、fire baking etc.
pipeline and pipeparts of linings’ back. Must apart 1 meter
upwards with hot source. |
| |
